SKANWEAR® Arc Waterproof Jacket without Hood (CL.2/ARC2/22CAL/CM²)

£554.95
#TS943V
Color
Size guide SKANWEAR® Arc Waterproof Jacket without Hood (CL.2/ARC2/22CAL/CM²)
JIMMY SIZE GUIDE
STANDARD SIZING GUIDE

When purchasing Arc Flash Protective Clothing online it is imperative to make sure you are measuring your size correctly. Note that sizing is not always the same as high street clothing brands. 

  • Please request assistance from another person when taking your measurements.
  • Measure over light clothing as thicker clothing can increase measurements.
  • Remove any items from your pockets before taking measurements.
  • Measure with the tape measure flat against the body.
  • Do not hold the tape measure too tightly.
  • Please choose the correct size based on your largest measurement: Chest or Waist.

Measuring Guidelines

Follow these simple steps to ensure your Arc Flash Protective Clothing will fit.

1. It is recommended to request assistance from another person when taking your measurements.

2. Take measurements over light clothing as thicker clothing can add to the measurements.

3. Remove any items from your pockets before taking measurements.

4. Measure with the tape measure flat against the body.

5. Do not hold the tape measure too tightly.

How to measure (Mens)

Height: Height is measured bare foot from the top of the head to the floor.

Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

Trouser Waist: Measure around your body at the position you wear your trousers.

Inside Leg: Measure from crotch down to ankle bone.

How to measure (Ladies)

Height: Height is measured bare foot from the top of the head to the floor.

Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

Hips: Keeping the tape parallel to the floor, measure around the widest part of the hips.

Trouser Waist: Measure around your body at the position you wear your trousers.

Inside Leg: Measure from crotch down to ankle bone.

How to measure Gloves

How to measure Shoes

TALL AND BIG & TALL SIZE GUIDE
  • Please request assistance from another person when taking your measurements.
  • Measure over light clothing as thicker clothing can increase measurements.
  • Remove any items from your pockets before taking measurements.
  • Measure with the tape measure flat against the body.
  • Do not hold the tape measure too tightly.
  • Please choose the correct size based on your largest measurement: Chest or Waist.

A. HEIGHT:
Height is measured bare foot from the top of the head to the floor.

B. CHEST:
Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

C. WAIST:
Measure around your waist at the widest point.

Mens Height Chart
Tall and Big & Tall
Height
6’0” – 6’4”
182cm – 192cm
Size Guide Illustration
Differences Between Regular, Tall and Big & Tall Lengths
Mens Tall Shirts and Tops
L-T XL-T 2XL-T 3XL-T 4XL-T 5XL-T 6XL-T
Chest Inch 42–45 45–48 48–51 51–54 54–57 57–60 60–63
Chest cm 107–114 114–122 122–129 129–137 137–144 144–152 152–159
Waist Inch 36–39 39–42 42–45 45–48 48–51 51–54 54–57
Waist cm 91–98 98–106 106–113 113–121 121–128 128–136 136–143

Tall Chest and Waist measures are in line with our regular sizing. Please refer to above Tall size chart.

Tall Body and Sleeve Lengths are 2” / 5cm longer than regular sizing.

T Sizing
Mens Big & Tall Shirts and Tops
2XL-BT 3XL-BT 4XL-BT 5XL-BT 6XL-BT
Chest Inch 48–52 52–56 56–60 60–64 64–68
Chest cm 122–132 132–142 142–152 152–162 162–172
Waist Inch 47–51 51–55 55–59 59–63 63–67
Waist cm 119–129 129–139 139–149 149–159 159–169

Big & Tall Chest and Waist measures are increased vs. regular sizing. Please refer to above Big & Tall size chart.

Big & Tall Body and Sleeve Lengths are 2” / 5cm longer than regular sizing.

B&T Sizing

How to measure your chest size

  

How to measure your waist size

How to measure your oversleeve

How to measure your inside leg seam

How to measure your height

Once you have your correct measurements, it's time to choose your Arc Flash PPE
Size
Choose options

Secure online payment

Description

Description

SKANWEAR® Arc Waterproof Jacket without Hood (CL.2/ARC2/22CAL/CM²)

Built for demanding electrical environments, the TS943V SKANWEAR® Arc Waterproof Jacket delivers reliable protection without compromising comfort or mobility. It keeps you completely dry with a tough outer waterproof layer, while the soft inner drop liner ensures all-day comfort and breathability. You stay protected from the elements without feeling weighed down, letting you move freely and focus on your work—rain or shine. Designed with adaptability in mind, it pairs seamlessly with the optional TS9H2X Arc Waterproof Hood, so you’re ready for changing site conditions at a moment’s notice.

  • 100% Inherent Arc FR Protection 
    The FR protection is woven into the fabric meaning it is permanent. No matter how many times the garment is worn or washed, the protection level always remains. This results in peace of mind knowing all SKANWEAR® garments will keep engineers safe for the life of the garment and it saves you money reducing the cost per use by not having to keep replacing garments after their chemical protection is washed out.
  • Easi-Arm™ Gusset Technology
    The added underarm panel has been fitted and developed to give greater freedom of movement through the sleeve and shoulder for working overhead and on the ground without exposing any skin.
  • Adaptable Hood System
    A dedicated hood (TS9H2X) attachment area with secure poppers allows quick fitting of the optional hood—ideal for switching between indoor and outdoor tasks. For hooded waterproof jacket (TS943VH)
  • Secure Front Closure
    The centre front storm guard combines a concealed zip with Velcro fastening, providing an extra barrier against wind, rain, and workplace hazards.
  • Enhanced Comfort & Mobility
    Featuring set-in sleeves with underarm gussets, this jacket allows unrestricted movement—ideal for engineers working in tight or elevated spaces. A high protective collar and dropped rear hem help shield against foul weather, keeping you covered and comfortable in challenging conditions.
  • Functional Storage
    Side seam zip pockets keep tools and essentials secure, while a self-fabric radio loop ensures easy access to communication devices on the job. An A5 Napoleon pocket, positioned behind the front zip, provides convenient and secure storage for tablets and documents, keeping essentials within easy reach.
  • Adjustable Fit
    Velcro-adjustable cuffs and hem toggles allow you to customise the fit, helping to seal out the elements and maintain comfort throughout the day.
  • Hi-Visibility Detailing
    50mm segmented reflective tape across the sleeves, body, and yokes improves visibility in low-light environments without restricting flexibility.

Technical Specification

ATPV = 22cal/cm2, ELIM = 18cal/cm2 & APC = 2
Class 2 Category 2
100% Inherent

Composition

  • Fabric Technology: Technical Waterproof
  • Weight: 305 g/m²

Standards

  • EN 61482-2:2020 ATPV = 22cal/cm2, ELIM = 18cal/cm2 & APC = 2
  • EN 1149-5:2018 (Electrostatic Discharge)
  • EN ISO 20471:2013+A1:2016 (Class 2 for size XS-S, Class 3 M upwards) (Class 2 when worn with TS9H2X)
  • EN ISO 11612:2015 A1 B1 C1 F1 (Heat & Limited Flame Spread)
  • EN 343:2019 Class 4 (Resistance to Water Penetration)
  • EN 343:2019 Class 3 (Resistance to Water Vapour)
  • EN ISO 13688:2013 (General Performance)
  • NFPA70E Compliant
Technical

Technical

Arc Category: HRC 2 / CAT 2 / ARC 2

Arc Class: Class 2

Cal Rating: 8 – 24 Cal/cm²

Certifications:

Technical Specification:

ATPV = 22cal/cm2, ELIM = 18cal/cm2 & APC = 2
Class 2 Category 3
100% Inherent

Composition

  • Fabric Technology: Technical Waterproof
  • Weight: 305 g/m²

Standards

  • EN 61482-2:2020 ATPV = 22cal/cm2, ELIM = 18cal/cm2 & APC = 2
  • EN 1149-5:2018 (Electrostatic Discharge)
  • EN ISO 20471:2013+A1:2016 (Class 2 for size XS-S, Class 3 M upwards) (Class 2 when worn with TS9H2X)
  • EN ISO 11612:2015 A1 B1 C1 F1 (Heat & Limited Flame Spread)
  • EN 343:2019 Class 4 (Resistance to Water Penetration)
  • EN 343:2019 Class 3 (Resistance to Water Vapour)
  • EN ISO 13688:2013 (General Performance)
  • NFPA70E Compliant
Wash Care

Wash Care

  • Wash at 40C/104F
  • Do not bleach
  • Dry Clean with Petroleum solvent
    only
  • Medium iron on reverse
  • Dry on warm medium setting
  • Clean with all closures fastened
Size Guide

Size Chart

STANDARD SIZING GUIDE

When purchasing Arc Flash Protective Clothing online it is imperative to make sure you are measuring your size correctly. Note that sizing is not always the same as high street clothing brands. 

  • Please request assistance from another person when taking your measurements.
  • Measure over light clothing as thicker clothing can increase measurements.
  • Remove any items from your pockets before taking measurements.
  • Measure with the tape measure flat against the body.
  • Do not hold the tape measure too tightly.
  • Please choose the correct size based on your largest measurement: Chest or Waist.

Measuring Guidelines

Follow these simple steps to ensure your Arc Flash Protective Clothing will fit.

1. It is recommended to request assistance from another person when taking your measurements.

2. Take measurements over light clothing as thicker clothing can add to the measurements.

3. Remove any items from your pockets before taking measurements.

4. Measure with the tape measure flat against the body.

5. Do not hold the tape measure too tightly.

How to measure (Mens)

Height: Height is measured bare foot from the top of the head to the floor.

Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

Trouser Waist: Measure around your body at the position you wear your trousers.

Inside Leg: Measure from crotch down to ankle bone.

How to measure (Ladies)

Height: Height is measured bare foot from the top of the head to the floor.

Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

Hips: Keeping the tape parallel to the floor, measure around the widest part of the hips.

Trouser Waist: Measure around your body at the position you wear your trousers.

Inside Leg: Measure from crotch down to ankle bone.

How to measure Gloves

How to measure Shoes

TALL AND BIG & TALL SIZE GUIDE
  • Please request assistance from another person when taking your measurements.
  • Measure over light clothing as thicker clothing can increase measurements.
  • Remove any items from your pockets before taking measurements.
  • Measure with the tape measure flat against the body.
  • Do not hold the tape measure too tightly.
  • Please choose the correct size based on your largest measurement: Chest or Waist.

A. HEIGHT:
Height is measured bare foot from the top of the head to the floor.

B. CHEST:
Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

C. WAIST:
Measure around your waist at the widest point.

Mens Height Chart
Tall and Big & Tall
Height
6’0” – 6’4”
182cm – 192cm
Size Guide Illustration
Differences Between Regular, Tall and Big & Tall Lengths
Mens Tall Shirts and Tops
L-T XL-T 2XL-T 3XL-T 4XL-T 5XL-T 6XL-T
Chest Inch 42–45 45–48 48–51 51–54 54–57 57–60 60–63
Chest cm 107–114 114–122 122–129 129–137 137–144 144–152 152–159
Waist Inch 36–39 39–42 42–45 45–48 48–51 51–54 54–57
Waist cm 91–98 98–106 106–113 113–121 121–128 128–136 136–143

Tall Chest and Waist measures are in line with our regular sizing. Please refer to above Tall size chart.

Tall Body and Sleeve Lengths are 2” / 5cm longer than regular sizing.

T Sizing
Mens Big & Tall Shirts and Tops
2XL-BT 3XL-BT 4XL-BT 5XL-BT 6XL-BT
Chest Inch 48–52 52–56 56–60 60–64 64–68
Chest cm 122–132 132–142 142–152 152–162 162–172
Waist Inch 47–51 51–55 55–59 59–63 63–67
Waist cm 119–129 129–139 139–149 149–159 159–169

Big & Tall Chest and Waist measures are increased vs. regular sizing. Please refer to above Big & Tall size chart.

Big & Tall Body and Sleeve Lengths are 2” / 5cm longer than regular sizing.

B&T Sizing

How to measure your chest size

  

How to measure your waist size

How to measure your oversleeve

How to measure your inside leg seam

How to measure your height

Once you have your correct measurements, it's time to choose your Arc Flash PPE

Downloads

TS943V Datasheet

Frequently asked questions

What's your return policy?

We have a 28-day return policy, which means you have 28 days from the date of dispatch to request a return if the item is unworn.

We do not accept returns for branded and custom made items. These items will only be accepted for return if the product is faulty.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

To start a return, you can contact us at sales@skanwear.com. Items sent back to us without first requesting a return will not be accepted. The customer will need to arrange the return at their own expense (unless the item is faulty) via their preferred courier.

Skanwear will not be responsible for the item(s) until received back on Skanwear premises.

For any other return queries, please email us at sales@skanwear.com

Returns policy

All returns for credit/exchanges must be within 28 days from the date of dispatch of the item (excluding items returned due to quality issues).

Goods will not be accepted back from the Customer without an official Skanwear returns authorization document, these can be requested at any time by emailing
sales@skanwear.com. You will need to provide the sales order reference number, item details and the quantity of items in your returns request.

Credit Notes will be issued upon receipt of returned goods, if applicable within 5 working days (to allow time for the items to go through the relevant quality checks). Returned goods must be resalable – unused (excluding goods returned with quality issues) and returned in the original packaging. Failure by you the customer to meet this requirement could result in a refusal to action the returns request and in turn the refund payment.

Goods returned due to quality issues are still required to be sent back to Skanwear in a respectable condition

Skanwear Guranteee

Our lifetime guarantee covers your garments against manufacturer error. Manufacturer error can include but is not limited to:

  1. Faulty stitching.
  2. Twisted sleeve lining.
  3. Hole(s) in the garment (within 28 days).
  4. Missing button(s) (within 28 days).
  5. Broken zipper (within 28 days).

Our guarantee does not cover (not exclusive):

  1. Wear and Tear.
  2. Damage from incorrect care for the garment.
  3. Damage caused by incorrect washing.
  4. Ripped and split garments.