• NEW ARRIVAL
  • NEW ARRIVAL
  • NEW ARRIVAL

SKANWEAR® ARC Removable Holster Pant (CL.1/ARC2/11CAL/CM2)

£185.13
#TS245X
Color
Size guide SKANWEAR® ARC Removable Holster Pant (CL.1/ARC2/11CAL/CM2)
JIMMY SIZE GUIDE
STANDARD SIZING GUIDE

When purchasing Arc Flash Protective Clothing online it is imperative to make sure you are measuring your size correctly. Note that sizing is not always the same as high street clothing brands.

  • Please request assistance from another person when taking your measurements.
  • Measure over light clothing as thicker clothing can increase measurements.
  • Remove any items from your pockets before taking measurements.
  • Measure with the tape measure flat against the body.
  • Do not hold the tape measure too tightly.
  • Please choose the correct size based on your largest measurement: Chest or Waist.

Measuring Guidelines

Follow these simple steps to ensure your Arc Flash Protective Clothing will fit.

1. Request assistance from another person when taking your measurements.

2. Take measurements over light clothing as thicker clothing can add to measurements.

3. Remove any items from your pockets before taking measurements.

4. Measure with the tape measure flat against the body.

5. Do not hold the tape measure too tightly.

How to measure (Mens)

Height: Height is measured bare foot from the top of the head to the floor.

Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

Trouser Waist: Measure around your body at the position you wear your trousers.

Inside Leg: Measure from crotch down to ankle bone.

How to measure (Ladies)

Height: Height is measured bare foot from the top of the head to the floor.

Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

Hips: Keeping the tape parallel to the floor, measure around the widest part of the hips.

Trouser Waist: Measure around your body at the position you wear your trousers.

Inside Leg: Measure from crotch down to ankle bone.

How to measure Gloves
How to measure Shoes

How to measure your chest size

How to measure your waist size

How to measure your oversleeve

How to measure your inside leg seam

How to measure your height

Once you have your correct measurements, it's time to choose your Arc Flash PPE

Size
Leg Length
Choose options

Secure online payment

Description

Description

SKANWEAR® ARC Removable Holster Pant (CL.1/ARC2/11CAL/CM2)

The TS245X SKANWEAR® ARC Removable Holster Pant combines 100% arc protection with superior comfort and functionality, making it perfect for electrical engineers. Its elasticated waistband and French bearer fastening provide flexibility and pressure relief, while durable features like a gusseted crotch, reinforced kneepad pockets, and a wide SKANWEAR® back belt loop ensure long-lasting performance. With detachable holster pockets for weight distribution and a versatile 2-in-1 design, these pants transition seamlessly between tool and utility wear. Certified to meet global safety standards, including the USA vertical flame test, the TS245X delivers unmatched protection in a unique grey option no competitor offers. 

  • 100% Inherent Arc FR Protection
    The FR protection is woven into the fabric meaning it is permanent. No matter how many times the garment is worn or washed, the protection level always remains. This results in peace of mind knowing all SKANWEAR® garments will keep engineers safe for the life of the garment and it saves you money reducing the cost per use by not having to keep replacing garments after their chemical protection is washed out. 
  • Elasticated Waistband
    An elasticated side waist allows extra movement for a comfier fit. 
  • Detachable Holster Pockets
    Feature zip and secure press studs to evenly distribute weight, reducing strain and minimising the risk of teeth breakage. Perfect for engineers who need reliable and practical storage solutions
  • Easi-Crotch™ Gusset
    Unlike conventional workwear with single-seam designs in the crotch area, our SKANWEAR® pant collection contains a unique construction that removes common pant issues such as pressure build-up leading to rips, tears, and discomfort. Inserting this additional fabric in the crotch area strategically disperses pressure across the entire gusset area meaning your pants are more durable, comfortable and are built to last. 
  • Gusseted Kneepad Pockets
    Designed for maximum flexibility and convenience, these gusseted kneepad pockets feature a bottom envelope entry for easy access and secure placement. Kneepad can be washed while still in the kneepad pocket area.
  • French Bearer Fastening
    Designed for ultimate comfort, the French Bearer Fastening evenly distributes pressure across the waist, ensuring freedom of movement and support during squatting or kneeling tasks.
  • Wide SKANWEAR® Back Belt Loop
    Engineered for durability and practicality, the reinforced centred SKANWEAR® Back Belt Loop minimises strain and ensures comfort while bending.

Pockets

  • Left Cargo Pocket
    Patch pocket with flap closure giving multi-functional storage possibilities for the wearer.

  • Rule Pocket
    Side leg pocket designed for the storage of a fold-up ruler.

  • Tool Pocket
    Multi-functional pocket storage for a range of tools in pockets and in holders.

  • 2 x Holster Pockets with pouch and compartments
    Storage for a range of tools in pockets and in holders.

Technical Specification

ELIM = 9.7cal/cm2, ATPV = 11cal/cm2 APC = 1 (Arc Rating)
Class 1 Category 2
100% Inherent

Composition:

  • Inherent Fabric: 54% Modacrylic, 45% Cotton, 1% Antistatic
  • Weight: 250 g/m2 / 7.4oz/yd

Standards:

  • EN 61482-2:2020 ELIM = 9.7cal/cm2, APTV = 11cal/cm2 APC = 1 (Arc Rating)
  • ASTM F1506 (Flame Resistant and Electric Arc Rated)
  • EN ISO 11612:2015 A1 A2 B1 C1 F1 (Heat & Limited Flame Spread)
  • EN 1149-5:2018 (Electrostatic Discharge)
  • EN ISO 13688:2013 (General Performance)
Technical

Technical

Arc Category: HRC 2 / CAT 2 / ARC 2

Arc Class: Class 1

Cal Rating: 8 – 24 Cal/cm²

Certifications:

Technical Specification:

ELIM = 9.7cal/cm2, ATPV = 11cal/cm2 APC = 1 (Arc Rating)
Class 1 Category 2
100% Inherent

Composition:

  • Inherent Fabric: 54% Modacrylic, 45% Cotton, 1% Antistatic
  • Weight: 250 g/m2 / 7.4oz/yd

Standards:

  • EN 61482-2:2020 ELIM = 9.7cal/cm2, APTV = 11cal/cm2 APC = 1 (Arc Rating)
  • ASTM F1506 (Flame Resistant and Electric Arc Rated)
  • EN ISO 11612:2015 A1 A2 B1 C1 F1 (Heat & Limited Flame Spread)
  • EN 1149-5:2018 (Electrostatic Discharge)
  • EN ISO 13688:2013 (General Performance)
Wash Care

Wash Care

Wash at 60C/140F

Do not bleach

Dry Clean with Petroleum solvent
only

Medium iron on reverse

Dry on warm medium setting

Clean with all closures fastened
Size Guide

Size Chart

STANDARD SIZING GUIDE

When purchasing Arc Flash Protective Clothing online it is imperative to make sure you are measuring your size correctly. Note that sizing is not always the same as high street clothing brands.

  • Please request assistance from another person when taking your measurements.
  • Measure over light clothing as thicker clothing can increase measurements.
  • Remove any items from your pockets before taking measurements.
  • Measure with the tape measure flat against the body.
  • Do not hold the tape measure too tightly.
  • Please choose the correct size based on your largest measurement: Chest or Waist.

Measuring Guidelines

Follow these simple steps to ensure your Arc Flash Protective Clothing will fit.

1. Request assistance from another person when taking your measurements.

2. Take measurements over light clothing as thicker clothing can add to measurements.

3. Remove any items from your pockets before taking measurements.

4. Measure with the tape measure flat against the body.

5. Do not hold the tape measure too tightly.

How to measure (Mens)

Height: Height is measured bare foot from the top of the head to the floor.

Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

Trouser Waist: Measure around your body at the position you wear your trousers.

Inside Leg: Measure from crotch down to ankle bone.

How to measure (Ladies)

Height: Height is measured bare foot from the top of the head to the floor.

Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

Hips: Keeping the tape parallel to the floor, measure around the widest part of the hips.

Trouser Waist: Measure around your body at the position you wear your trousers.

Inside Leg: Measure from crotch down to ankle bone.

How to measure Gloves
How to measure Shoes

How to measure your chest size

How to measure your waist size

How to measure your oversleeve

How to measure your inside leg seam

How to measure your height

Once you have your correct measurements, it's time to choose your Arc Flash PPE

    Frequently asked questions

    What's your return policy?

    We have a 28-day return policy, which means you have 28 days from the date of dispatch to request a return if the item is unworn.

    We do not accept returns for branded and custom made items. These items will only be accepted for return if the product is faulty.

    To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

    To start a return, you can contact us at sales@skanwear.com. Items sent back to us without first requesting a return will not be accepted. The customer will need to arrange the return at their own expense (unless the item is faulty) via their preferred courier.

    Skanwear will not be responsible for the item(s) until received back on Skanwear premises.

    For any other return queries, please email us at sales@skanwear.com

    Returns policy

    All returns for credit/exchanges must be within 28 days from the date of dispatch of the item (excluding items returned due to quality issues).

    Goods will not be accepted back from the Customer without an official Skanwear returns authorization document, these can be requested at any time by emailing
    sales@skanwear.com. You will need to provide the sales order reference number, item details and the quantity of items in your returns request.

    Credit Notes will be issued upon receipt of returned goods, if applicable within 5 working days (to allow time for the items to go through the relevant quality checks). Returned goods must be resalable – unused (excluding goods returned with quality issues) and returned in the original packaging. Failure by you the customer to meet this requirement could result in a refusal to action the returns request and in turn the refund payment.

    Goods returned due to quality issues are still required to be sent back to Skanwear in a respectable condition

    Skanwear Guranteee

    Our lifetime guarantee covers your garments against manufacturer error. Manufacturer error can include but is not limited to:

    1. Faulty stitching.
    2. Twisted sleeve lining.
    3. Hole(s) in the garment (within 28 days).
    4. Missing button(s) (within 28 days).
    5. Broken zipper (within 28 days).

    Our guarantee does not cover (not exclusive):

    1. Wear and Tear.
    2. Damage from incorrect care for the garment.
    3. Damage caused by incorrect washing.
    4. Ripped and split garments.