SKANWEAR® Arc Hoodie (CL.2/ARC2/24CAL/CM²)

£198.95
#SFX610
Size guide SKANWEAR® Arc Hoodie (CL.2/ARC2/24CAL/CM²)
JIMMY SIZE GUIDE
STANDARD SIZING GUIDE

When purchasing Arc Flash Protective Clothing online it is imperative to make sure you are measuring your size correctly. Note that sizing is not always the same as high street clothing brands. 

  • Please request assistance from another person when taking your measurements.
  • Measure over light clothing as thicker clothing can increase measurements.
  • Remove any items from your pockets before taking measurements.
  • Measure with the tape measure flat against the body.
  • Do not hold the tape measure too tightly.
  • Please choose the correct size based on your largest measurement: Chest or Waist.

Measuring Guidelines

Follow these simple steps to ensure your Arc Flash Protective Clothing will fit.

1. It is recommended to request assistance from another person when taking your measurements.

2. Take measurements over light clothing as thicker clothing can add to the measurements.

3. Remove any items from your pockets before taking measurements.

4. Measure with the tape measure flat against the body.

5. Do not hold the tape measure too tightly.

How to measure (Mens)

Height: Height is measured bare foot from the top of the head to the floor.

Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

Trouser Waist: Measure around your body at the position you wear your trousers.

Inside Leg: Measure from crotch down to ankle bone.

How to measure (Ladies)

Height: Height is measured bare foot from the top of the head to the floor.

Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

Hips: Keeping the tape parallel to the floor, measure around the widest part of the hips.

Trouser Waist: Measure around your body at the position you wear your trousers.

Inside Leg: Measure from crotch down to ankle bone.

How to measure Gloves

How to measure Shoes

TALL AND BIG & TALL SIZE GUIDE
  • Please request assistance from another person when taking your measurements.
  • Measure over light clothing as thicker clothing can increase measurements.
  • Remove any items from your pockets before taking measurements.
  • Measure with the tape measure flat against the body.
  • Do not hold the tape measure too tightly.
  • Please choose the correct size based on your largest measurement: Chest or Waist.

A. HEIGHT:
Height is measured bare foot from the top of the head to the floor.

B. CHEST:
Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

C. WAIST:
Measure around your waist at the widest point.

Mens Height Chart
Tall and Big & Tall
Height
6’0” – 6’4”
Size Guide Illustration
Differences Between Regular, Tall and Big & Tall Lengths
Mens Tall Shirts and Tops
L-T XL-T 2XL-T 3XL-T 4XL-T 5XL-T 6XL-T
Chest Inch 31-33 33-35 35–37 37–39 39-41 39–41 41–43
Waist Inch 35–37 37–39 39–41 41–43 43–45 43–45 54–47

Tall Chest and Waist measures are in line with our regular sizing. Please refer to above Tall size chart.

Tall Body and Sleeve Lengths are 2” / 5cm longer than regular sizing.

T Sizing
Mens Big & Tall Shirts and Tops
2XL-BT 3XL-BT 4XL-BT 5XL-BT 6XL-BT
Chest Inch 48–52 52–56 56–60 60–64 64–68
Waist Inch 39-41 41–43 43–45 43–45 45–47

Big & Tall Chest and Waist measures are increased vs. regular sizing. Please refer to above Big & Tall size chart.

Big & Tall Body and Sleeve Lengths are 2” / 5cm longer than regular sizing.

B&T Sizing

How to measure your chest size

  

How to measure your waist size

How to measure your oversleeve

How to measure your inside leg seam

How to measure your height

Once you have your correct measurements, it's time to choose your Arc Flash PPE
Size
Color
Choose options

Secure online payment

Description

Description

SKANWEAR® Arc Hoodie (CL.2/ARC2/24CAL/CM²)

The Arc Flash Hoodie is Inherent, comfortable, combined with protection against Electric Arc and Heat and Flame.

Featuring reflective piping detailing, a shaped hood with a grown on collar which is ergonomically designed to move with the head to keep you safe. Fabric is interlock knit and brushed on the inside for a comfortable and fluffy interior.

Features & Benefits:

  • 100% Inherent Arc FR Protection
    The FR protection is woven into the fabric meaning it is permanent. No matter how many times the garment is worn or washed, the protection level always remains. This results in peace of mind knowing all SKANWEAR® garments will keep engineers safe for the life of the garment and it saves you money reducing the cost per use by not having to keep replacing garments after their chemical protection is washed out.

  • Easi-Arm™ Gusset Technology
    The added underarm panel has been fitted and developed to give greater freedom of movement through the sleeve and shoulder for working overhead and on the ground without exposing any skin.

  • Heavyweight Fabric
    We chose a heavyweight fabric for this garment so it is thicker and warmer for cooler weather conditions. Ideal for layering in winter.

  • Zip front fastening
    The zip itself is made of FR Plastic and not metal. We used a zip instead of an overhead hoody so if an engineer is ever in a situation where they are caught or snagged, they can unzip and escape to safety.

  • 3 Piece Hood with Grown on Collar
    The hood itself is actually part of the jacket itself, and when the hood is down it becomes a collar and doesn't dangle down the back. The hood itself when worn fits snug around the head and retains shape. It is also double-lined for added warmth, ideal for cooler working conditions.

  • Internal Media Loop
    Located inside the right pocket is a media loop to feed in headphones. Perfect for engineers who are performing remote diagnostics.

  • No Drawstring
    We hear from the industry that drawstrings pose a snagging hazard. We have developed a solution that eliminates drawstrings entirely, without compromising the fit of the hood.
Pockets

  • 2 X Concealed Zipped Pockets
    Secure hidden pockets with zip fastening

Technical Specifications

ELIM = 12 cal/cm, EBT50 24cal/cm² & APC = 1
Class 2 Category 2
100% Inherent

Composition:
  • Fabric Technology: Performance Sweatshirt
  • Weight: 405g/m² / 11.9 oz
Standards:
  • EN 61482-2:2020 (ELIM = 12 cal/cm², EBT50 = 24 cal/cm2 & APC = 1)
    (Arc Rating)
  • EN 1149-5:2018 (Electrostatic Discharge)
  • EN ISO 11612:2015 A1 A2 B1 C2 F1 (Heat & Limited Flame Spread)
  • EN ISO 13688:2013 (General Performance)
      Technical

      Technical

      Arc Category: HRC 2 / CAT 2 / ARC 2

      Arc Class: Class 1

      Cal Rating: 8 – 24 Cal/cm²

      Certifications:

      Technical Specification:

      ELIM = 12 cal/cm, EBT50 24cal/cm² & APC = 1
      Class 2 Category 2
      100% Inherent

      Composition:

      • Fabric Technology: Performance Sweatshirt
      • Weight: 405g/m² / 11.9 oz

      Standards:

      • EN 61482-2:2020 (ELIM = 12 cal/cm², EBT50 = 24 cal/cm2 & APC = 1)
        (Arc Rating)
      • EN 1149-5:2018 (Electrostatic Discharge)
      • EN ISO 11612:2015 A1 A2 B1 C2 F1 (Heat & Limited Flame Spread)
      • EN ISO 13688:2013 (General Performance)
      Wash Care

      Wash Care

      • Wash at 60C/140F
      • Do not bleach
      • Dry Clean with Petroleum solvent
        only
      • Medium iron on reverse
      • Dry on cool low setting
      • Clean with all closures fastened
      Size Guide

      Size Chart

      STANDARD SIZING GUIDE

      When purchasing Arc Flash Protective Clothing online it is imperative to make sure you are measuring your size correctly. Note that sizing is not always the same as high street clothing brands. 

      • Please request assistance from another person when taking your measurements.
      • Measure over light clothing as thicker clothing can increase measurements.
      • Remove any items from your pockets before taking measurements.
      • Measure with the tape measure flat against the body.
      • Do not hold the tape measure too tightly.
      • Please choose the correct size based on your largest measurement: Chest or Waist.

      Measuring Guidelines

      Follow these simple steps to ensure your Arc Flash Protective Clothing will fit.

      1. It is recommended to request assistance from another person when taking your measurements.

      2. Take measurements over light clothing as thicker clothing can add to the measurements.

      3. Remove any items from your pockets before taking measurements.

      4. Measure with the tape measure flat against the body.

      5. Do not hold the tape measure too tightly.

      How to measure (Mens)

      Height: Height is measured bare foot from the top of the head to the floor.

      Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

      Trouser Waist: Measure around your body at the position you wear your trousers.

      Inside Leg: Measure from crotch down to ankle bone.

      How to measure (Ladies)

      Height: Height is measured bare foot from the top of the head to the floor.

      Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

      Hips: Keeping the tape parallel to the floor, measure around the widest part of the hips.

      Trouser Waist: Measure around your body at the position you wear your trousers.

      Inside Leg: Measure from crotch down to ankle bone.

      How to measure Gloves

      How to measure Shoes

      TALL AND BIG & TALL SIZE GUIDE
      • Please request assistance from another person when taking your measurements.
      • Measure over light clothing as thicker clothing can increase measurements.
      • Remove any items from your pockets before taking measurements.
      • Measure with the tape measure flat against the body.
      • Do not hold the tape measure too tightly.
      • Please choose the correct size based on your largest measurement: Chest or Waist.

      A. HEIGHT:
      Height is measured bare foot from the top of the head to the floor.

      B. CHEST:
      Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

      C. WAIST:
      Measure around your waist at the widest point.

      Mens Height Chart
      Tall and Big & Tall
      Height
      6’0” – 6’4”
      Size Guide Illustration
      Differences Between Regular, Tall and Big & Tall Lengths
      Mens Tall Shirts and Tops
      L-T XL-T 2XL-T 3XL-T 4XL-T 5XL-T 6XL-T
      Chest Inch 31-33 33-35 35–37 37–39 39-41 39–41 41–43
      Waist Inch 35–37 37–39 39–41 41–43 43–45 43–45 54–47

      Tall Chest and Waist measures are in line with our regular sizing. Please refer to above Tall size chart.

      Tall Body and Sleeve Lengths are 2” / 5cm longer than regular sizing.

      T Sizing
      Mens Big & Tall Shirts and Tops
      2XL-BT 3XL-BT 4XL-BT 5XL-BT 6XL-BT
      Chest Inch 48–52 52–56 56–60 60–64 64–68
      Waist Inch 39-41 41–43 43–45 43–45 45–47

      Big & Tall Chest and Waist measures are increased vs. regular sizing. Please refer to above Big & Tall size chart.

      Big & Tall Body and Sleeve Lengths are 2” / 5cm longer than regular sizing.

      B&T Sizing

      How to measure your chest size

        

      How to measure your waist size

      How to measure your oversleeve

      How to measure your inside leg seam

      How to measure your height

      Once you have your correct measurements, it's time to choose your Arc Flash PPE

        Frequently asked questions

        What's your return policy?

        We have a 28-day return policy, which means you have 28 days from the date of dispatch to request a return if the item is unworn.

        We do not accept returns for branded and custom made items. These items will only be accepted for return if the product is faulty.

        To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

        To start a return, you can contact us at sales@skanwear.com. Items sent back to us without first requesting a return will not be accepted. The customer will need to arrange the return at their own expense (unless the item is faulty) via their preferred courier.

        Skanwear will not be responsible for the item(s) until received back on Skanwear premises.

        For any other return queries, please email us at sales@skanwear.com

        Returns policy

        All returns for credit/exchanges must be within 28 days from the date of dispatch of the item (excluding items returned due to quality issues).

        Goods will not be accepted back from the Customer without an official Skanwear returns authorization document, these can be requested at any time by emailing
        sales@skanwear.com. You will need to provide the sales order reference number, item details and the quantity of items in your returns request.

        Credit Notes will be issued upon receipt of returned goods, if applicable within 5 working days (to allow time for the items to go through the relevant quality checks). Returned goods must be resalable – unused (excluding goods returned with quality issues) and returned in the original packaging. Failure by you the customer to meet this requirement could result in a refusal to action the returns request and in turn the refund payment.

        Goods returned due to quality issues are still required to be sent back to Skanwear in a respectable condition

        Skanwear Guranteee

        Our lifetime guarantee covers your garments against manufacturer error. Manufacturer error can include but is not limited to:

        1. Faulty stitching.
        2. Twisted sleeve lining.
        3. Hole(s) in the garment (within 28 days).
        4. Missing button(s) (within 28 days).
        5. Broken zipper (within 28 days).

        Our guarantee does not cover (not exclusive):

        1. Wear and Tear.
        2. Damage from incorrect care for the garment.
        3. Damage caused by incorrect washing.
        4. Ripped and split garments.