SKANWEAR® Arc Enhanced Softshell Jacket (CL.2/ARC3/28CAL/CM²)

£280.95
#SFX415
Size guide SKANWEAR® Arc Enhanced Softshell Jacket (CL.2/ARC3/28CAL/CM²)
STANDARD SIZING GUIDE

When purchasing Arc Flash Protective Clothing online it is imperative to make sure you are measuring your size correctly. Note that sizing is not always the same as high street clothing brands. 

  • Please request assistance from another person when taking your measurements.
  • Measure over light clothing as thicker clothing can increase measurements.
  • Remove any items from your pockets before taking measurements.
  • Measure with the tape measure flat against the body.
  • Do not hold the tape measure too tightly.
  • Please choose the correct size based on your largest measurement: Chest or Waist.

Measuring Guidelines

Follow these simple steps to ensure your Arc Flash Protective Clothing will fit.

1. It is recommended to request assistance from another person when taking your measurements.

2. Take measurements over light clothing as thicker clothing can add to the measurements.

3. Remove any items from your pockets before taking measurements.

4. Measure with the tape measure flat against the body.

5. Do not hold the tape measure too tightly.

How to measure (Mens)

Height: Height is measured bare foot from the top of the head to the floor.

Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

Trouser Waist: Measure around your body at the position you wear your trousers.

Inside Leg: Measure from crotch down to ankle bone.

How to measure (Ladies)

Height: Height is measured bare foot from the top of the head to the floor.

Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

Hips: Keeping the tape parallel to the floor, measure around the widest part of the hips.

Trouser Waist: Measure around your body at the position you wear your trousers.

Inside Leg: Measure from crotch down to ankle bone.

How to measure Gloves

How to measure Shoes

TALL AND BIG & TALL SIZE GUIDE
  • Please request assistance from another person when taking your measurements.
  • Measure over light clothing as thicker clothing can increase measurements.
  • Remove any items from your pockets before taking measurements.
  • Measure with the tape measure flat against the body.
  • Do not hold the tape measure too tightly.
  • Please choose the correct size based on your largest measurement: Chest or Waist.

A. HEIGHT:
Height is measured bare foot from the top of the head to the floor.

B. CHEST:
Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

C. WAIST:
Measure around your waist at the widest point.

Mens Height Chart
Tall and Big & Tall
Height
6’0” – 6’4”
Size Guide Illustration
Differences Between Regular, Tall and Big & Tall Lengths
Mens Tall Shirts and Tops
L-T XL-T 2XL-T 3XL-T 4XL-T 5XL-T 6XL-T
Chest Inch 42-45 45-48 48–51 51–54 54-57 57-60 60–63
Waist Inch 36–39 39–42 42–45 45–48 48–51 51–54 54–57

Tall Chest and Waist measures are in line with our regular sizing. Please refer to above Tall size chart.

Tall Body and Sleeve Lengths are 2” / 5cm longer than regular sizing.

T Sizing
Mens Big & Tall Shirts and Tops
2XL-BT 3XL-BT 4XL-BT 5XL-BT 6XL-BT
Chest Inch 48–52 52–56 56–60 60–64 64–68
Waist Inch 47-51 51–55 55–59 59–63 63–67

Big & Tall Chest and Waist measures are increased vs. regular sizing. Please refer to above Big & Tall size chart.

Big & Tall Body and Sleeve Lengths are 2” / 5cm longer than regular sizing.

B&T Sizing

How to measure your chest size

  

How to measure your waist size

How to measure your oversleeve

How to measure your inside leg seam

How to measure your height

Once you have your correct measurements, it's time to choose your Arc Flash PPE
Size
Color
Choose options

Secure online payment

Description

Description

 

SKANWEAR® Arc Enhanced Softshell Jacket (CL.2/ARC3/28CAL/CM²)

This a game-changer for electrical engineers in energy sector. Our commitment to excellence in safety and style has led us to create a high quality, arc & flame resistant multipurpose softshell jacket that provides 100% Inherent Arc FR protection plus complete comfort with a dynamic design.

We know that visibility is key in hazardous work environments, and we understand that not every engineer requires EN20471 certification, therefore this solution is for the those who value enhanced visibility without the strict regulations.

  • 100% Inherent Arc FR Protection
    The FR protection is woven into the fabric meaning it is permanent. No matter how many times the garment is worn or washed, the protection level always remains. This results in peace of mind knowing all SKANWEAR® garments will keep engineers safe for the life of the garment and it saves you money reducing the cost per use by not having to keep replacing garments after their chemical protection is washed out.
  • Easi-Arm™ Gusset Technology
    The added underarm panel has been fitted and developed to give greater freedom of movement through the sleeve and shoulder for working overhead and on the ground without exposing any skin.
  • Showerproof / Waterproof
    3-layer laminated waterproof fabric which combines Showerproof and Windproof properties, ensuring top performance during light showers and gusty weather conditions.
  • High Stand collar
    The high collar is not only modern in look but provides excellent coverage around the neck when fastened to the top. The less skin exposed the better.
  • Adjustable Cuff
    Allows the wearer to tighten or release the cuff fit over underlayers and against the weather elements.
  • Standards Badge
    External transfer badge displaying the garments standards and Arc cal rating
  • NFPA70E Compliant
    This garment is NFPA 70E compliant, ensuring it adheres to the safety standards established by the National Fire Protection Association for protecting engineers against electrical hazards. This designation signifies that the garment has undergone rigorous testing and meets the necessary criteria to minimise the risk of electric arc flash incidents in electrical work environments.


Extra Pockets:

  • 1 X Zipped Chest Pocket
    Secure hidden pockets with zip fastening

  • 2 X Zipped Waist Pockets
    Secure hidden pockets with zip fastening

Technical Specification

ELIM 23cal/cm², EBT50 28cal/cm² & APC = 2
Class 2 Category 3
100% Inherent

Composition:

  • Fabric Technology: Technical 3-ply Softshell
  • Weight: 360 g/m2 / 10.6oz

Standards:

  • EN 61482-2:2020 ELIM = 23cal/cm², EBT50 = 28cal/cm² & APC = 2 (Arc Rating)
  • EN 1149-5:2018 (Electrostatic Discharge)
  • EN ISO 11612:2015 A1 B1 C1 F1 (Heat & Limited Flame Spread)
  • EN ISO 13688:2013 (General Performance)
Technical

Technical

Arc Category: HRC 3 / CAT 3 / ARC 3

Arc Class: Class 2

Cal Rating: 25 – 39 Cal/cm²

Certifications:

Technical Specification:

ELIM 23cal/cm², EBT50 28cal/cm² & APC = 2
Class 2 Category 3
100% Inherent

Composition:

  • Fabric Technology: Technical 3-ply Softshell
  • Weight: 360 g/m2 / 10.6oz

Standards:

  • EN 61482-2:2020 ELIM = 23cal/cm², EBT50 = 28cal/cm² & APC = 2 (Arc Rating)
  • EN 1149-5:2018 (Electrostatic Discharge)
  • EN ISO 11612:2015 A1 B1 C1 F1 (Heat & Limited Flame Spread)
  • EN ISO 13688:2013 (General Performance)
Wash Care

Wash Care

  • Wash at 60C/140F
  • Do not bleach
  • Dry Clean with Petroleum solvent
    only
  • Medium iron on reverse
  • Dry on cool low setting
  • Clean with all closures fastened
Size Guide

Size Chart

STANDARD SIZING GUIDE

When purchasing Arc Flash Protective Clothing online it is imperative to make sure you are measuring your size correctly. Note that sizing is not always the same as high street clothing brands. 

  • Please request assistance from another person when taking your measurements.
  • Measure over light clothing as thicker clothing can increase measurements.
  • Remove any items from your pockets before taking measurements.
  • Measure with the tape measure flat against the body.
  • Do not hold the tape measure too tightly.
  • Please choose the correct size based on your largest measurement: Chest or Waist.

Measuring Guidelines

Follow these simple steps to ensure your Arc Flash Protective Clothing will fit.

1. It is recommended to request assistance from another person when taking your measurements.

2. Take measurements over light clothing as thicker clothing can add to the measurements.

3. Remove any items from your pockets before taking measurements.

4. Measure with the tape measure flat against the body.

5. Do not hold the tape measure too tightly.

How to measure (Mens)

Height: Height is measured bare foot from the top of the head to the floor.

Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

Trouser Waist: Measure around your body at the position you wear your trousers.

Inside Leg: Measure from crotch down to ankle bone.

How to measure (Ladies)

Height: Height is measured bare foot from the top of the head to the floor.

Chest: Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

Hips: Keeping the tape parallel to the floor, measure around the widest part of the hips.

Trouser Waist: Measure around your body at the position you wear your trousers.

Inside Leg: Measure from crotch down to ankle bone.

How to measure Gloves

How to measure Shoes

TALL AND BIG & TALL SIZE GUIDE
  • Please request assistance from another person when taking your measurements.
  • Measure over light clothing as thicker clothing can increase measurements.
  • Remove any items from your pockets before taking measurements.
  • Measure with the tape measure flat against the body.
  • Do not hold the tape measure too tightly.
  • Please choose the correct size based on your largest measurement: Chest or Waist.

A. HEIGHT:
Height is measured bare foot from the top of the head to the floor.

B. CHEST:
Measure chest circumference around fullest part, keeping the tape level under the arms and across the back.

C. WAIST:
Measure around your waist at the widest point.

Mens Height Chart
Tall and Big & Tall
Height
6’0” – 6’4”
Size Guide Illustration
Differences Between Regular, Tall and Big & Tall Lengths
Mens Tall Shirts and Tops
L-T XL-T 2XL-T 3XL-T 4XL-T 5XL-T 6XL-T
Chest Inch 42-45 45-48 48–51 51–54 54-57 57-60 60–63
Waist Inch 36–39 39–42 42–45 45–48 48–51 51–54 54–57

Tall Chest and Waist measures are in line with our regular sizing. Please refer to above Tall size chart.

Tall Body and Sleeve Lengths are 2” / 5cm longer than regular sizing.

T Sizing
Mens Big & Tall Shirts and Tops
2XL-BT 3XL-BT 4XL-BT 5XL-BT 6XL-BT
Chest Inch 48–52 52–56 56–60 60–64 64–68
Waist Inch 47-51 51–55 55–59 59–63 63–67

Big & Tall Chest and Waist measures are increased vs. regular sizing. Please refer to above Big & Tall size chart.

Big & Tall Body and Sleeve Lengths are 2” / 5cm longer than regular sizing.

B&T Sizing

How to measure your chest size

  

How to measure your waist size

How to measure your oversleeve

How to measure your inside leg seam

How to measure your height

Once you have your correct measurements, it's time to choose your Arc Flash PPE

Frequently asked questions

What's your return policy?

We have a 28-day return policy, which means you have 28 days from the date of dispatch to request a return if the item is unworn.

We do not accept returns for branded and custom made items. These items will only be accepted for return if the product is faulty.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

To start a return, you can contact us at sales@skanwear.com. Items sent back to us without first requesting a return will not be accepted. The customer will need to arrange the return at their own expense (unless the item is faulty) via their preferred courier.

Skanwear will not be responsible for the item(s) until received back on Skanwear premises.

For any other return queries, please email us at sales@skanwear.com

Returns policy

All returns for credit/exchanges must be within 28 days from the date of dispatch of the item (excluding items returned due to quality issues).

Goods will not be accepted back from the Customer without an official Skanwear returns authorization document, these can be requested at any time by emailing
sales@skanwear.com. You will need to provide the sales order reference number, item details and the quantity of items in your returns request.

Credit Notes will be issued upon receipt of returned goods, if applicable within 5 working days (to allow time for the items to go through the relevant quality checks). Returned goods must be resalable – unused (excluding goods returned with quality issues) and returned in the original packaging. Failure by you the customer to meet this requirement could result in a refusal to action the returns request and in turn the refund payment.

Goods returned due to quality issues are still required to be sent back to Skanwear in a respectable condition

Skanwear Guranteee

Our lifetime guarantee covers your garments against manufacturer error. Manufacturer error can include but is not limited to:

  1. Faulty stitching.
  2. Twisted sleeve lining.
  3. Hole(s) in the garment (within 28 days).
  4. Missing button(s) (within 28 days).
  5. Broken zipper (within 28 days).

Our guarantee does not cover (not exclusive):

  1. Wear and Tear.
  2. Damage from incorrect care for the garment.
  3. Damage caused by incorrect washing.
  4. Ripped and split garments.